How our products work

SDS and Tech Data Sheets available below

A close-up view of a small animal skull, showing the nasal cavity and eye sockets, placed on a black surface.

How our spot degreaser works

Bare Bones Solutions spot degreaser was made for tough to move spots in bone.

  • Citrus smell

  • Helps move tough grease spots

  • Speeds up the degreasing process

This product contains a strong solvent derived from citrus. It was created with chemists and tested across Canada. It is specially made to be gentle on bones and protect collagen, which give bone flexibility and durability. Bones that were cleaned with this product in summer 2025 show no signs of degradation.

How to Use:

  1. Wearing gloves, add 10-15ml of product to affected area.

  2. Layer paper towel on the area and soak the paper towel, wicking degreaser into the bone over time. There are other ways to use this product.

  3. Let sit six to twenty four hours, depending on bone thickness and size of grease spot.

  4. Place bone in Bare Bones Solutions degreaser to degrease normally (see above section on powder use).

The product comes as a liquid with a strong citrus smell. Keep product sealed when not in use. Keep out of reach of children and pets.

Please refer to the Safety Data Sheet (SDS), and label for safety or technical and safety information.

Buy Now
Close-up of a piece of cheese with part of its rind removed, revealing a soft, creamy interior.
A section of a turkey bone, showing internal porous structure, placed on a black surface.

How our Powder works

Bare Bones Solutions bone degreaser is a safer and easier alternative to using ammonia. It is cheaper than ammonia per dose with other advantages:

  • No strong or harmful smell

  • Helps whiten blood-stained bone

  • Speeds up the degreasing process

This product is a mix of a saponifier and solvent. The saponifier will turn grease to soap. It was created with chemists and tested across Canada. It is specially made to be gentle on bones and protect collagen, which give bone flexibility and durability. Bones that were cleaned with this product in August 2024 show no signs of degradation.

How to Use:

  1. Add 3.5-4.5 grams of the product to every litre of water (or 12-16 grams for every gallon), and mix vigorously. (5 grams is approximately 1 teaspoon)

  2. Add bones to the solution.

  3. Heat consistently to the correct temperature for the species (see below).

  4. Change the water when it looks dirty or oily

The product comes as a dry powder that stores well on the shelf. When mixed with water, it has a light, soapy smell. Keep product sealed when not in use. Keep out of reach of children and pets.

Recommended Temperatures:

  • Mammals: 44–48°C/111-118°F (use lower heat for young or fragile bones)

  • Birds, fish, delicate or young bones: Keep at or below 30°C/86°F

Please refer to the Safety Data Sheet (SDS), and label for safety or technical and safety information.

Buy Now

SDS, tech data and labels

Powder SDS
Powder SDS Fr
Powder Label
Powder Tech Data
Spot Remover SDS
spot remove SDS Fr
Spot Remover label
Spot Remover Tech

FAQs

  • In solution the powder degreaser has a mild soapy odor, unless it has a large grease load.

    The spot degreaser smells like lemons.

  • Progress in this project has been managed in phases. The release schedule will be no different and dependent on local and national growth, as well as other factors. It has been discussed, but the immediate focus has been Canadian release. We appreciate your patience as we work towards serving other countries.

  • As with any chemical, follow all local or regional laws and regulations.

Back to top
degreased skull

CONTACT US FOR consulting INFORMATION